目录
0.背景
1.目标Tology
2.SW(辅测端)调整
2.1 调整辅测端交换机vlan
2.2 调整辅测端交换机vlanif
2.3 调整辅测端mac0 口IP
2.4 辅测添加route配置
3. SW(主测端)调整
3.1 调整主测端交换机vlanif
3.2主测添加route配置
4. 恢复SW 配置
4.1 delete Vlanif IP
4.2 恢复vlan 端口
5. 查看vlan info
0.背景
两层环境，修改为跨三层环境。调整交换机vlan 并配置Vlanif
1.目标Tology
2.SW(辅测端)调整
2.1 调整辅测端交换机vlan
1. 调整前查看SW vlan # dis vlan <BJS2-B05-SW02>dis vlan The total number of VLANs is: 45 -------------------------------------------------------------------------------- U: Up; D: Down; TG: Tagged; UT: Untagged; MP: Vlan-mapping; ST: Vlan-stacking; #: ProtocolTransparent-vlan; *: Management-vlan; -------------------------------------------------------------------------------- VID Type Ports -------------------------------------------------------------------------------- 1 common UT:100GE0/0/1(D) 100GE0/0/2(D) 100GE0/0/3(D) 100GE0/0/4(D) 25GE0/0/13(D) 25GE0/0/14(D) TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 2 common 4 common 6 common 10 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 20 common 100 common TG:25GE0/0/8(U) 25GE0/0/18(U) 110 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 112 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 120 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 126 common 151 common 152 common 200 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 201 common 666 common UT:25GE0/0/9(D) 25GE0/0/10(D) 25GE0/0/11(D) 25GE0/0/12(D) 25GE0/0/15(D) 25GE0/0/16(D) 888 common 985 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/18(U) 999 common 1000 common 1001 common UT:25GE0/0/8(U) 25GE0/0/18(U) 25GE0/0/24(D) 1002 common UT:25GE0/0/7(U) 25GE0/0/17(U) 1003 common UT:25GE0/0/19(U) 25GE0/0/20(U) TG:25GE0/0/13(D) 25GE0/0/14(D) 1004 common UT:25GE0/0/23(D) 1006 common 1007 common 1011 common UT:25GE0/0/26(U) 25GE0/0/27(U) 1012 common UT:25GE0/0/25(U) 25GE0/0/28(U) 1021 common UT:25GE0/0/1(U) 25GE0/0/5(U) 1022 common UT:25GE0/0/2(U) 25GE0/0/6(U) 1023 common UT:25GE0/0/3(U) 25GE0/0/4(U) 1188 common 1189 common 1266 common 2. 修改0/0/5 口vlan # interface 25GE 0/0/5 # 进入0/0/5 口 [BJS2-B05-SW02]interface 25GE 0/0/5 [BJS2-B05-SW02-25GE0/0/5]dis th # interface 25GE0/0/5 description vlan 1021 port link-type access port default vlan 1021 jumboframe enable 12288 # return [BJS2-B05-SW02-25GE0/0/5] 3. 修改0/0/5 口 vlan 为vlan 1188 [BJS2-B05-SW02-25GE0/0/5]port default vlan 1188 [BJS2-B05-SW02-25GE0/0/5]dis th # interface 25GE0/0/5 description vlan 1021 port link-type access port default vlan 1188 jumboframe enable 12288 # return [BJS2-B05-SW02-25GE0/0/5] 4. 修改后再次查看SW vlan [BJS2-B05-SW02-25GE0/0/5]dis vlan The total number of VLANs is: 45 -------------------------------------------------------------------------------- U: Up; D: Down; TG: Tagged; UT: Untagged; MP: Vlan-mapping; ST: Vlan-stacking; #: ProtocolTransparent-vlan; *: Management-vlan; -------------------------------------------------------------------------------- VID Type Ports -------------------------------------------------------------------------------- 1 common UT:100GE0/0/1(D) 100GE0/0/2(D) 100GE0/0/3(D) 100GE0/0/4(D) 25GE0/0/13(D) 25GE0/0/14(D) TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 2 common 4 common 6 common 10 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 20 common 100 common TG:25GE0/0/8(U) 25GE0/0/18(U) 110 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 112 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 120 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 126 common 151 common 152 common 200 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/17(U) 25GE0/0/18(U) 201 common 666 common UT:25GE0/0/9(D) 25GE0/0/10(D) 25GE0/0/11(D) 25GE0/0/12(D) 25GE0/0/15(D) 25GE0/0/16(D) 888 common 985 common TG:25GE0/0/7(U) 25GE0/0/8(U) 25GE0/0/18(U) 999 common 1000 common 1001 common UT:25GE0/0/8(U) 25GE0/0/18(U) 25GE0/0/24(D) 1002 common UT:25GE0/0/7(U) 25GE0/0/17(U) 1003 common UT:25GE0/0/19(U) 25GE0/0/20(U) TG:25GE0/0/13(D) 25GE0/0/14(D) 1004 common UT:25GE0/0/23(D) 1006 common 1007 common 1011 common UT:25GE0/0/26(U) 25GE0/0/27(U) 1012 common UT:25GE0/0/25(U) 25GE0/0/28(U) 1021 common UT:25GE0/0/1(U) 1022 common UT:25GE0/0/2(U) 25GE0/0/6(U) 1023 common UT:25GE0/0/3(U) 25GE0/0/4(U) 1188 common UT:25GE0/0/5(U) 1189 common [BJS2-B05-SW02-25GE0/0/5]quit # 退出vlan2.2 调整辅测端交换机vlanif
1. 查看vlan 1188 的 Vlanif info [BJS2-B05-SW02]interface Vlanif 1188 [BJS2-B05-SW02-Vlanif1188]dis th # interface Vlanif1188 # return [BJS2-B05-SW02-Vlanif1188] 2. 配置Vlanif IP [BJS2-B05-SW02-Vlanif1188]ip address 33.33.33.119 255.255.255.0 [BJS2-B05-SW02-Vlanif1188]dis th # interface Vlanif1188 ip address 33.33.33.119 255.255.255.0 # return2.3 调整辅测端mac0 口IP
辅测端mac0 口IP 应该与 mac0 口连接的SW 口所在的vlanIf IP 同网段， 所以删除辅测端mac0 口IP，并重新配置辅测端mac0 口IP 1. 修改mac0 iP 前查看 [root@localhost network-scripts]# ifconfig swift150f0 swift150f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 11.11.11.219 netmask 255.255.255.0 broadcast 11.11.11.255 ether 74:3e:39:10:02:57 txqueuelen 1000 (Ethernet) RX packets 13444487183 bytes 11717176270925 (10.6 TiB) RX errors 0 dropped 105467 overruns 148176 frame 0 TX packets 6664048343 bytes 3725548201653 (3.3 TiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost network-scripts]# 2. 修改mac0 IP [root@localhost network-scripts]# cat /etc/sysconfig/network-scripts/ifcfg-swift150f0 HWADDR=74:3E:39:10:02:57 TYPE=Ethernet PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=none IPADDR=33.33.33.219 # 修改IP为33.33.33.219 PREFIX=24 DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV4_DNS_PRIORITY=100 IPV6INIT=no NAME=swift150f0 UUID=a8bd1d0a-be3d-4fc2-a3fb-fe027e17e7bd DEVICE=swift150f0 ONBOOT=yes [root@localhost network-scripts]# 3. 修改后使iPv4 生效 [root@localhost network-scripts]# systemctl restart network [root@localhost network-scripts]# ifconfig swift150f0 swift150f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 33.33.33.219 netmask 255.255.255.0 broadcast 33.33.33.255 ether 74:3e:39:10:02:57 txqueuelen 1000 (Ethernet) RX packets 13444487241 bytes 11717176277760 (10.6 TiB) RX errors 0 dropped 105488 overruns 148176 frame 0 TX packets 6664048344 bytes 3725548201713 (3.3 TiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost network-scripts]#2.4 辅测添加route配置
e3. SW(主测端)调整
3.1 调整主测端交换机vlanif
#因为mac0 连接SW 0/0/1 口，所在vlan:1021 1. 查看vlan 1021 的 Vlanif info [BJS2-B05-SW02-Vlanif1188]interface Vlanif 1021 [BJS2-B05-SW02-Vlanif1021]dis th # interface Vlanif1021 # return [BJS2-B05-SW02-Vlanif1021 2. 配置Vlanif IP [BJS2-B05-SW02-Vlanif1021]ip address 11.11.11.118 24 [BJS2-B05-SW02-Vlanif1021]dis th # interface Vlanif1021 ip address 11.11.11.118 255.255.255.0 # return [BJS2-B05-SW02-Vlanif1021]3.2主测添加route配置
1. 添加route 前查看 [root@localhost wangkatool]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.108.0 192.168.2.1 255.255.252.0 UG 0 0 0 eno1 10.0.130.0 192.168.2.1 255.255.254.0 UG 0 0 0 eno1 10.1.22.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 10.1.30.0 192.168.2.1 255.255.254.0 UG 0 0 0 eno1 11.11.11.0 0.0.0.0 255.255.255.0 U 104 0 0 swift150f0 12.12.12.0 0.0.0.0 255.255.255.0 U 106 0 0 swift150f1 13.13.13.0 0.0.0.0 255.255.255.0 U 107 0 0 swift171f0 14.14.14.0 0.0.0.0 255.255.255.0 U 108 0 0 swift171f1 15.15.15.0 0.0.0.0 255.255.255.0 U 108 0 0 swift171f1 16.16.16.0 0.0.0.0 255.255.255.0 U 108 0 0 swift171f1 192.168.2.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 192.168.2.0 0.0.0.0 255.255.255.0 U 100 0 0 eno1 192.168.4.0 192.168.2.1 255.255.252.0 UG 0 0 0 eno1 192.168.22.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 192.168.30.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 192.168.100.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 [root@localhost wangkatool]# 2. 添加route # route add -net <三层环境vlanif 网段>/24 gw <本机SW 口所在vlanif IP> e.g: route add -net 33.33.33.0/24 gw 11.11.11.118 [root@localhost wangkatool]# route add -net 33.33.33.0/24 gw 11.11.11.118 [root@localhost wangkatool]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.108.0 192.168.2.1 255.255.252.0 UG 0 0 0 eno1 10.0.130.0 192.168.2.1 255.255.254.0 UG 0 0 0 eno1 10.1.22.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 10.1.30.0 192.168.2.1 255.255.254.0 UG 0 0 0 eno1 11.11.11.0 0.0.0.0 255.255.255.0 U 104 0 0 swift150f0 12.12.12.0 0.0.0.0 255.255.255.0 U 106 0 0 swift150f1 13.13.13.0 0.0.0.0 255.255.255.0 U 107 0 0 swift171f0 14.14.14.0 0.0.0.0 255.255.255.0 U 108 0 0 swift171f1 15.15.15.0 0.0.0.0 255.255.255.0 U 108 0 0 swift171f1 16.16.16.0 0.0.0.0 255.255.255.0 U 108 0 0 swift171f1 33.33.33.0 11.11.11.118 255.255.255.0 UG 0 0 0 swift150f0 192.168.2.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 192.168.2.0 0.0.0.0 255.255.255.0 U 100 0 0 eno1 192.168.4.0 192.168.2.1 255.255.252.0 UG 0 0 0 eno1 192.168.22.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 192.168.30.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 192.168.100.0 192.168.2.1 255.255.255.0 UG 0 0 0 eno1 [root@localhost wangkatool]# [root@localhost wangkatool]#4. 恢复SW 配置
4.1 delete Vlanif IP
以上操作共修改如下： 1. 将SW 0/0/5 口从vlan 1021 更改为vlan1188 2. 将SW 0/0/6口从vlan 1022 更改为vlan1189 3. 为vlan1188 配置Vlanif IP 4. 将vlan1021 配置Vlanif IP 5. 将vlan1022 配置Vlanif IP 需要恢复以上配置 //************************************************************************ 1. 删除vlan 1188配置Vlanif IP [BJS2-B05-SW02]interface Vlanif 1188 [BJS2-B05-SW02-Vlanif1188]dis th # interface Vlanif1188 ip address 33.33.33.119 255.255.255.0 # return [BJS2-B05-SW02-Vlanif1188]undo ip address 33.33.33.119 255.255.255.0 [BJS2-B05-SW02-Vlanif1188] [BJS2-B05-SW02-Vlanif1188]dis th # interface Vlanif1188 # return [BJS2-B05-SW02-Vlanif1188]q //************************************************************************ 2. 删除vlan 1021 配置Vlanif IP [BJS2-B05-SW02]interface Vlanif 1021 # 进入Vlanif 1021 [BJS2-B05-SW02-Vlanif1021]dis th # interface Vlanif1021 ip address 11.11.11.118 255.255.255.0 # return [BJS2-B05-SW02-Vlanif1021]undo ip address 11.11.11.118 255.255.255.0 # 删除vlanif IP [BJS2-B05-SW02-Vlanif1021] [BJS2-B05-SW02-Vlanif1021]dis th # interface Vlanif1021 # return [BJS2-B05-SW02-Vlanif1021] [BJS2-B05-SW02-Vlanif1021]q [BJS2-B05-SW02] //************************************************************************ 3. 删除vlan 1022 配置Vlanif IP [BJS2-B05-SW02]interface Vlanif 1022 [BJS2-B05-SW02-Vlanif1022]dis th # interface Vlanif1022 ip address 12.12.12.118 255.255.255.0 # return [BJS2-B05-SW02-Vlanif1022]undo ip address 12.12.12.118 255.255.255.0 # 删除vlanif IP [BJS2-B05-SW02-Vlanif1022] [BJS2-B05-SW02-Vlanif1022]dis th # interface Vlanif1022 # return [BJS2-B05-SW02-Vlanif1022]4.2 恢复vlan 端口
以上操作共修改如下： 1. 将SW 0/0/5 口从vlan 1021 更改为vlan1188 2. 将SW 0/0/6口从vlan 1022 更改为vlan1189 3. 为vlan1188 配置Vlanif IP 4. 将vlan1021 配置Vlanif IP 5. 将vlan1022 配置Vlanif IP 需要恢复以上配置 //************************************************************************ 1. 将0/0/5 口从vlan 1188 恢复为 vlan 1021 [BJS2-B05-SW02]interface 25GE 0/0/5 [BJS2-B05-SW02-25GE0/0/5]dis th # interface 25GE0/0/5 description vlan 1021 port link-type access port default vlan 1188 jumboframe enable 12288 # return [BJS2-B05-SW02-25GE0/0/5] [BJS2-B05-SW02-25GE0/0/5]port default vlan 1021 # 恢复为vlan 1021 [BJS2-B05-SW02-25GE0/0/5]dis th # 查看vlan info # interface 25GE0/0/5 description vlan 1021 port link-type access port default vlan 1021 jumboframe enable 12288 # return [BJS2-B05-SW02-25GE0/0/5] 2. 将0/0/6 口从vlan 1189 恢复为 vlan 1022 [BJS2-B05-SW02]interface 25GE 0/0/6 [BJS2-B05-SW02-25GE0/0/6]dis th # interface 25GE0/0/6 port link-type access port default vlan 1189 jumboframe enable 12288 # return [BJS2-B05-SW02-25GE0/0/6]port default vlan 1022 [BJS2-B05-SW02-25GE0/0/6] [BJS2-B05-SW02-25GE0/0/6]dis th # interface 25GE0/0/6 port link-type access port default vlan 1022 jumboframe enable 12288 # return [BJS2-B05-SW02-25GE0/0/6] [BJS2-B05-SW02-25GE0/0/6]q5. 查看vlan info
1. 查看指定vlan info <BJS2-B05-SW02>dis vlan 1021 -------------------------------------------------------------------------------- U: Up; D: Down; TG: Tagged; UT: Untagged; MP: Vlan-mapping; ST: Vlan-stacking; #: ProtocolTransparent-vlan; *: Management-vlan; -------------------------------------------------------------------------------- VID Type Ports -------------------------------------------------------------------------------- 1021 common UT:25GE0/0/1(U) 25GE0/0/5(U) VID Status Property MAC-LRN Statistics Description -------------------------------------------------------------------------------- 1021 enable default enable disable VLAN 1021 <BJS2-B05-SW02> # 查看vlan 1022 <BJS2-B05-SW02>dis vlan 1022 -------------------------------------------------------------------------------- U: Up; D: Down; TG: Tagged; UT: Untagged; MP: Vlan-mapping; ST: Vlan-stacking; #: ProtocolTransparent-vlan; *: Management-vlan; -------------------------------------------------------------------------------- VID Type Ports -------------------------------------------------------------------------------- 1022 common UT:25GE0/0/2(U) 25GE0/0/6(U) VID Status Property MAC-LRN Statistics Description -------------------------------------------------------------------------------- 1022 enable default enable disable VLAN 1022 <BJS2-B05-SW02> //********************************************************************* 查看vlan 1188 <BJS2-B05-SW02>dis vlan 1188 -------------------------------------------------------------------------------- U: Up; D: Down; TG: Tagged; UT: Untagged; MP: Vlan-mapping; ST: Vlan-stacking; #: ProtocolTransparent-vlan; *: Management-vlan; -------------------------------------------------------------------------------- VID Type Ports -------------------------------------------------------------------------------- 1188 common VID Status Property MAC-LRN Statistics Description -------------------------------------------------------------------------------- 1188 enable default enable disable VLAN 1188 <BJS2-B05-SW02>