当前位置：首页 > news >正文

基于MATLAB的IEEE 14节点系统牛顿-拉夫逊潮流算法实现

news 2026/6/1 19:34:05

一、算法框架设计

function [V, delta, P, Q] = NR_PF_IEEE14(bus_data, branch_data, baseMVA)% 输入参数：% bus_data: 节点数据矩阵（n×12）% branch_data: 支路数据矩阵（m×14）% baseMVA: 基准容量（默认100MVA）% 数据总线结构设计sys = struct(...'bus', bus_data, ...'branch', branch_data, ...'Ybus', [], ...'n_bus', size(bus_data,1), ...'n_branch', size(branch_data,1)...);% 初始化参数V = ones(sys.n_bus,1);      % 初始电压幅值delta = zeros(sys.n_bus,1); % 初始电压相角tolerance = 1e-6;           % 收敛容差max_iter = 50;              % 最大迭代次数% 构建Ybus矩阵（稀疏矩阵优化）sys.Ybus = makeYbus(sys.branch, sys.n_bus, baseMVA);% 主循环迭代for iter = 1:max_iter% 计算功率不匹配[P_calc, Q_calc] = power_calc(V, delta, sys.Ybus, baseMVA);P_mismatch = (bus_data(:,8) - P_calc)./baseMVA;Q_mismatch = (bus_data(:,9) - Q_calc)./baseMVA;% 收敛判断if max(abs([P_mismatch; Q_mismatch])) < tolerancebreak;end% 构建雅可比矩阵J = jacobian_matrix(V, delta, sys.Ybus, sys.n_bus);% 求解修正方程dX = J \ [-P_mismatch; -Q_mismatch];% 更新变量delta = delta + dX(1:sys.n_bus);V = V + dX(sys.n_bus+1:end);end
end

二、关键模块

1. 线路数据总线结构

% 线路数据结构示例（IEEE14标准）
branch_data = [1 2 0.01938 0.05917 0.0528 0 0 0 0 0 1 -360 360;  % 线路1-21 5 0.05403 0.22304 0.0492 0 0 0 0 0 1 -360 360;  % 线路1-52 3 0.04699 0.19797 0.0438 0 0 0 0 0 1 -360 360;  % 线路2-3% ... 其他支路数据
];% 参数说明：
% [f_bus, t_bus, R, X, B, rateA, rateB, rateC, ratio, angle, angmin, angmax]

2. 导纳矩阵构建（稀疏优化）

function Ybus = makeYbus(branch, n_bus, baseMVA)Ybus = sparse(n_bus,n_bus);for k = 1:size(branch,1)f = branch(k,1); t = branch(k,2);Ybus(f,t) = Ybus(f,t) - 1/(branch(k,3)+1j*branch(k,4));Ybus(t,f) = Ybus(t,f) - 1/(branch(k,3)+1j*branch(k,4));Ybus(f,f) = Ybus(f,f) + 1/(branch(k,3)+1j*branch(k,4)) + branch(k,5)/2;Ybus(t,t) = Ybus(t,t) + 1/(branch(k,3)+1j*branch(k,4)) + branch(k,5)/2;end
end

3. 雅可比矩阵构建

function J = jacobian_matrix(V, delta, Ybus, n_bus)G = real(Ybus); B = imag(Ybus);J = zeros(2*n_bus);% 构建雅可比矩阵子块for i = 1:n_busfor j = 1:n_busJ(i,j) = -B(i,j) - V(i)*V(j)*(G(i,j)*sin(delta(i)-delta(j)) - B(i,j)*cos(delta(i)-delta(j)));J(i,j+n_bus) = V(i)*V(j)*(G(i,j)*cos(delta(i)-delta(j)) + B(i,j)*sin(delta(i)-delta(j))) - V(i)*G(i,j);J(i+n_bus,j) = V(i)*V(j)*(G(i,j)*cos(delta(i)-delta(j)) + B(i,j)*sin(delta(i)-delta(j))) + V(j)*G(i,j);J(i+n_bus,j+n_bus) = -B(i,j) + V(j)*V(i)*(G(i,j)*sin(delta(i)-delta(j)) - B(i,j)*cos(delta(i)-delta(j)));endend
end

三、典型测试结果

1. 节点电压分布

节点	电压幅值(pu)	相角(°)
1	1.060	0.0
2	1.045	-4.98
3	1.010	-12.72
4	1.019	-10.33
14	1.036	-16.04

2. 收敛曲线

% 绘制功率不匹配收敛曲线
semilogy(1:iter, abs(P_mismatch), 'r-o', 1:iter, abs(Q_mismatch), 'b-s');
xlabel('迭代次数'); ylabel('功率不匹配(pu)');
legend('有功误差', '无功误差');
title('NR算法收敛特性');

四、扩展功能实现

1. 变压器分接头调节

function [branch, V] = tap_control(branch, V, delta, V_min, V_max)for k = 1:size(branch,1)if branch(k,12) ~= branch(k,13)  % 存在分接头k_v = branch(k,12) + (V(k) - V_min)/0.0125;  % 分接头调节branch(k,:) = [branch(k,1:11), k_v, branch(k,13)];endend
end

2. 无功限制处理

function [Q_gen, Q_limit_flag] = q_limit_handling(Q_gen, Q_min, Q_max)Q_limit_flag = 0;for i = 1:length(Q_gen)if Q_gen(i) > Q_max(i)Q_gen(i) = Q_max(i);Q_limit_flag = 1;elseif Q_gen(i) < Q_min(i)Q_gen(i) = Q_min(i);Q_limit_flag = 1;endend
end

参考代码含线路数据总线形成的ieee14节点系统newton-raphson潮流 www.youwenfan.com/contentcnl/80352.html